909AB-K-5Z是双液型快固化阻燃型环氧树脂结构胶，用于常温或低温快固化，固化后接着层有较高的硬度，因而可承受特强之冲击与震动，接着层具有良好之机械特性与电绝缘性，能承受温度之变动及挠曲撕剥应力，无腐蚀性；广泛应用于各类电子元器件、电工电器、土木工程、机电五金、磁性元件、光电产品、汽配组件以及金属、陶瓷、塑料、橡胶、玻璃，纤维制品、工艺品、宝石等之粘接固定、修补灌注等，能快速定位固定，具有很高的粘接性及阻燃特性。
外观及特性：
主剂909A-K-5Z
颜 色 黑色
外 观 有粘性的环氧树脂
粘 度（25℃） 15000-25000cps（可调）
比 重（25℃） 1.20
保存期限（25℃） 6个月
固化剂909B-K-5Z
颜 色 米黄色
外 观 蜂蜜状液体
粘 度（25℃） 15000-25000cps（可调）
比 重（25℃） 1.20
保存期限（25℃） 6个月
混合比例： A ：B = 1 ：1 或其它比例（重量比）
可使用时间：
主剂和固化剂混合后的可使用时间，是依混合总量和操作的温度而定。通常100克的混合胶在25℃时为1-2分钟左右。
固化条件：
常温下一般需要5-10分钟
909ab-k-5z is a double liquid fast curing and flame-retardant epoxy resin structural adhesive, which is used for fast curing at room temperature or low temperature. After curing, the next layer has high hardness, so it can withstand extremely strong impact and vibration. The next layer has good mechanical properties and electrical insulation, can withstand temperature change and flexure peeling stress, and is non corrosive. It is widely used in various electronic components, electrical appliances Civil engineering, mechanical and electrical hardware, magnetic components, photoelectric products, auto parts and components, as well as metal, ceramic, plastic, rubber, glass, fiber products, handicrafts, gemstones, etc., can be bonded and fixed quickly, with high adhesion and flame retardant characteristics.
Appearance and characteristics:
Main agent 909a-k-5z
Color black
Epoxy resin with sticky appearance
Viscosity (25 ℃) 15000-25000cps (adjustable)
Specific gravity (25 ℃) 1.20
Shelf life (25 ℃) 6 months
Curing agent 909b-k-5z
Color beige
Appearance honey liquid
Viscosity (25 ℃) 15000-25000cps (adjustable)
Specific gravity (25 ℃) 1.20
Shelf life (25 ℃) 6 months
Mixing ratio: A: B = 1:1 or other ratio (weight ratio)
Available time:
The usable time of main agent and curing agent after mixing depends on the total amount of mixing and the temperature of operation. Usually 100 grams of mixed glue is about 1-2 minutes at 25 ℃.
Curing conditions:
5-10 minutes at normal temperature
发表评论
◎欢迎参与讨论，请在这里发表您的看法、交流您的观点。